Professional Engine Steam Cleaning for Fleets & Commercial Vehicles
Keep your fleet running cleaner, longer.
Steam cleaning your engine is one of the most effective ways to restore performance, extend lifespan and prevent costly breakdowns. At Vardens, we use professional-grade, high-temperature steam systems to safely clean engines across all types of commercial and fleet vehicles.
Steam cleaning engines is a proven method of cleaning deep into your engine to remove built-up grime, grease, and dirt. By doing so, you can improve the overall performance and efficiency of your fleet. Engine steam cleaning improves fuel economy and reduces the risk of engine breakdowns and costly repairs.
Read on to find out how engine steam cleaning can help your fleet to perform at its best.
Why Steam Clean an Engine?
Over time, engines collect grease, oil and carbon deposits that cause overheating, poor fuel efficiency and unnecessary wear. Steam cleaning removes this build-up without harsh chemicals or damage to sensitive components.
Another benefit of steam cleaning engines is improved fuel economy. When engines are clogged with dirt and grime, they have to work harder to function properly. Leading to increased fuel consumption and increased costs. By thoroughly cleaning, your engines can run more efficiently, resulting in better fuel efficiency and cost savings.
We recommend a steam clean engine treatment to lift stubborn grease and dirt safely.
Our Professional Steam Cleaning Process
We follow a controlled, step-by-step process to ensure your engines are cleaned safely and effectively.
1. Engine Preparation
We isolate and protect electrical components, filters and air intakes to ensure no moisture reaches sensitive parts.
2. Degreasing and Pre-Treatment
A biodegradable degreaser is applied to loosen heavy grime and oil deposits before steam is used.
3. Steam Cleaning
High-temperature, low-moisture steam is applied under pressure to dissolve stubborn contaminants and carbon build-up.
4. Rinsing and Drying
Engines are lightly rinsed and air-dried, leaving no residue and ensuring complete safety before restart.
5. Final Inspection
Our team performs a visual inspection to confirm a clean, safe engine bay ready for service.
This process improves efficiency while reducing downtime, with minimal disruption to your operation.
Engine steam cleaning involves a precise approach to ensure effective cleaning without causing any damage. While the exact process may vary depending on the type of engine and equipment used, the following steps provide a general guideline for steam cleaning engines:
When to Steam Clean Your Engine
Engine steam cleaning can be part of your regular maintenance schedule or used to solve specific issues.
It’s especially useful:
- Before MOT or safety inspections
- After oil or coolant leaks
- Following major repairs
- During scheduled fleet maintenance
- When preparing vehicles for sale or return
If your vehicles run in demanding environments or cover high mileage, we recommend steam cleaning every 6–12 months.
Is Engine Steam Cleaning Safe?
Yes. When performed by trained professionals, engine steam cleaning is completely safe for all types of engines, including diesel and hybrid vehicles.
Our technicians use controlled pressure and temperature, along with protective shielding, to avoid any damage to wiring, sensors or filters. All work is carried out in line with industry health, safety and environmental standards.
We use a high-pressure steam cleaner to steam clean engine parts without scrubbing paint or rubber seals.
Rinsing
After steam cleaning, rinse off the loosened dirt and degreaser residue with a gentle stream of water. Avoid using excessive water pressure, as it can force water into sensitive electrical components. Take care to rinse all areas thoroughly. Make sure no cleaning agents or debris remain on the engine surfaces.
Drying
Once the rinsing is complete, allow the engine to air dry naturally or use compressed air to speed up the process. Ensure that all electrical connectors and sensitive components are completely dry before starting the engine.
engine cleaning Maintenance Tips
After performing engine cleaning, it is important to implement proper maintenance to maintain the performance of your engines. Consider the following tips:
Regular Vehicle Inspections
Schedule regular inspections to identify any signs of dirt buildup or potential issues. This will allow you to address any concerns promptly and prevent them from escalating.
Scheduled Vehicle Cleaning
Establish a regular cleaning schedule based on the specific needs of your fleet and operating conditions. This will help prevent excessive dirt buildup and maintain optimal engine performance.
Air Filter Maintenance
Pay attention to the air filters in your engines and clean or replace them as recommended. Clean air filters ensure proper airflow and prevent dirt and debris from entering the engine.
Fluid Checks
Regularly check and maintain proper fluid levels, such as oil and coolant. Clean engines operate more efficiently when fluids are at the appropriate levels.
Professional Vehicle Maintenance
Consider engaging professional Engine Steam cleaner services periodically to ensure a thorough cleaning and to address any hard-to-reach areas. Professional cleaners have the expertise and equipment to deliver exceptional results.
By following these maintenance tips, you can prolong the benefits of steam cleaning and keep your fleet running smoothly for longer.
Common Misconceptions of Engine Cleaning
Despite its numerous benefits, steam cleaning an engine is sometimes misunderstood. Let’s address some common misconceptions surrounding this cleaning method:
Engine Damage: Some believe that steam cleaning can damage the engine components. However, when done correctly, steam cleaning is a safe and effective method that poses no risk to the engine. It is crucial to follow proper techniques and safety precautions to avoid any potential damage.
Water: Concerns about water entering sensitive electrical components often arise. By covering these components with waterproof covers and avoiding excessive water pressure, the risk of water ingress is minimised. Additionally, allowing the engine to dry thoroughly after cleaning further reduces this risk.
Effectiveness: Some question the effectiveness of using an engine steam cleaner, believing that other methods provide better results. However, steam cleaning offers deep penetration and removal of dirt, grime, and grease. This makes it highly effective in cleaning engine components that are difficult to reach using other methods.
Maintenance Frequency: Another misconception is that steam cleaning engines needs to be done frequently. The frequency depends on various factors, such as operating conditions and the type of fleet. Periodic steam cleaning, with regular maintenance, is usually sufficient to keep engines clean and performing optimally.
You can make an informed decision about steam cleaning your engines and harness its benefits for your fleet.
Professional Engine Steam clean Services for fleets
While you can perform engine steam cleaning yourself, at Vardens we specialise in this field. Our services offer the expertise, equipment, and resources necessary to provide a thorough and efficient steam cleaning experience.
Engaging professional engine steam cleaner services can be beneficial in several ways. Firstly, the Vardens team have extensive knowledge and experience in steam cleaning engines, ensuring a meticulous and effective cleaning process. We can access hard-to-reach areas and apply our expertise to deliver exceptional results.
Secondly, our truck cleaning services use industrial-grade steam cleaners and specialised attachments, which may not be readily available for personal use. These tools enable us to tackle even the most challenging cleaning tasks and achieve optimal cleanliness.
Lastly, professional steam cleaning services can save you time and effort. Instead of dedicating valuable resources to perform the cleaning yourself, you can rely on experts to handle the job efficiently, allowing you to focus on other essential aspects of fleet management.
Professional Engine Steam cleaner: SMART Services FRom Vardens
Steam cleaning engines is a valuable method to boost the performance and extend the lifespan of your fleet. By penetrating deep into engine components, steam cleaning removes built-up grime, grease, and dirt, leading to improved efficiency, fuel economy, and reduced risk of breakdowns.
In this guide, we have explored the benefits, processes, and safety precautions of smart engine steam cleaning. We discussed the tools and equipment required and maintenance tips to maximise the benefits. Additionally, we debunked common misconceptions surrounding steam cleaning an engine and highlighted the option of professional cleaning services.
Regularly steam clean engine compartments to preserve resale value and keep servicing costs down.
Don’t let dirty engines affect the performance of your fleet. Embrace steam cleaning engines as a proactive maintenance practice to keep your engines running smoothly, reduce maintenance costs, and enhance the overall lifespan of your vehicles. With this ultimate guide, you now have the knowledge and understanding to take advantage of engine steam cleaning and optimise your fleet’s performance.
If you’re in need of expert advice and guidance on Engine Steam Cleaning, contact Vardens. Our team of professionals can provide the expertise and assistance you need to achieve the best results for your vehicle. Steam cleaning engines is an investment in the long-term value of your vehicle.
the challenge
The company needed a solution to maintain their engines in optimal condition, reduce unexpected breakdowns, and extend the lifespan of their buses. They required a service that would effectively clean engine components without causing damage or extensive downtime.
Our Solution
Vardens was chosen to provide their specialised Engine Steam Cleaning services due to their expertise and commitment to using advanced, non-invasive cleaning techniques. Vardens proposed a quarterly steam cleaning schedule for all engines to ensure consistent maintenance without interrupting the company’s operations.
The service
Vardens’ technicians used high-pressure steam cleaners designed to remove oil, grease, and built-up dirt from engine components. The process involved:
- Pre-Cleaning Inspection: To identify specific problem areas and tailor the steam cleaning process.
- Careful Application: Technicians used controlled steam pressure to avoid damage to sensitive engine parts.
- Post-Cleaning Testing: Ensured that engines ran smoothly and no residual moisture remained.
The Results
- Improved Engine Performance: Regular steam cleaning led to better fuel efficiency and smoother engine operation.
- Reduced Maintenance Costs: The cleaner engines required fewer repairs, resulting in significant cost savings over time.
- Increased Vehicle Uptime: With engines running more reliably, the buses experienced less downtime, enhancing service reliability.
- Positive Environmental Impact: The cleaning process used minimal water and no harmful chemicals, aligning with the company’s environmental goals.
The outcome
Vardens’ engine steam cleaning service has transformed how the company maintains its fleet. Not only have they seen a noticeable improvement in engine performance, but their maintenance costs have also decreased significantly.
Vardens’ Engine Steam Cleaning service provided the transportation company with a reliable and effective maintenance solution that improved vehicle performance and reduced operational costs. This case study highlights the importance of regular, professional maintenance and the specific benefits of steam cleaning in fleet management.
